Facility:
Approximately 5500 sqare feet in a modern climate controlled building, with
one tailgate shipping dock.
CNC Milling Equipement:
1- 2012 DMG/ Mori Seiki DuraVerticle 1035 eco VMC 15 HP, 12,000 RPM Cat 40,
MAPPS IV Control, 40x22x20 travels with Renishaw OMP 40-2 Spindle Probe
for on machine inspection
1- 2004 Bridgeport 760 XP3 VMC 25 H.P., 12,000 RPM Big Plus Cat 40 spindle
with 300 psi coolant thru, and Fanuc 18i-MB control. 30x24x24 travels
1- 2006 Hurco VM-1 VMC 15 H.P., 8000 RPM Cat 40 spindle with Hurco Max
Control, 26x14x18 travels.
2- Lagun FTV-2 Knee Mills with Prototrak M2 controls.
1- Alliant TMV Knee Mill with Prototrak A.G.E.2 control
1- Alliant TMV Knee Mill with Prototrak M2 control
1- Alliant TMV Knee Mill with Prototrak Edge control
1- HAAS 5C CNC 4th Axis Index Head
CNC Lathe:
1- Milltronics ML-15 with 60" bed, 15" swing, 2.18" through spindle,
Centurion 6 control and Dorian 8 station Smartdex Automatic Turret.
Manual Millers:
1- Bridgeport Series 1 Knee Mill
3- Alliant TMV Knee Mill
Manual Lathes:
1- Takasawa TSL-800 EngineLathe with 15" swing and 48" bed
1- Hardinge HLV-H Toolroom Lathe
1- Hardinge HC Chucker with Threading Attachment
EDM:
1- Hansvedt SM-150B Sinker Type EDM Machine 20"x 12" table with
12" Ram travel
Molding:
1- Trubor 50 RS- 31/2 50 Ton Injection Molding Machine
Honing:
1- Sunnen MBB1650 Precision Honing Machine- 3" capacity
Saws:
1- Doringer D-350H Automatic Cold Saw with Dual Motors
1- Startrite H225 Horizontal Band Saw
1- Jet VBS-400 Verticle Band Saw
1- 10" Everett Abrasive Cut- Off Saw
Grinding:
1- Do All D824-10 Automatic Wet Grinder- 8"x 24"
1- Boyer Schultz H612 Surface Grinder - 6"x 18"
1- Acme 6B-II 48" Stroke Sander
1- Baldor 510 Carbide Grinder
1- Dayton Industrial Grinder
2- Dayton 6" Buffers
1- Rockwell Sander/ Grinder
Heat Treating;
1- Huppert 9PF-IF Furnace 2000 degree max
Abrasive Finishing:
1- Econoline Direct Pressure Floor Type Sandblast Unit with 36"x 22" x 20"
work area
1- Sweco 18" Bowl Type Tumbler with AquaSafe WTS-55 AJ Aqueous
Treatment System
Inspection Equipment:
1- 24" Tesa-Hite Electronic Digital Height Gage
1- 12" Mitutoyo Height Master Cadillac Gage
1- 14" Kodak Optical Comparator with Surface Illumination and Turret
Magnification up to 31.25 X
1- Sunnen PG-800 Precision Gage .3700- 3.0000 Range .00005 Graduations
1- Rock of Ages Surface Plate 18"x 24"
1- Mitutoyo 36 pc Gage Block Set
3- Van Keuren Pin Gage Sets .011-.625
Large Assortment of Various Measuring Tools, Gages, Deltronic Pins
and Indicators
Approximately 5500 sqare feet in a modern climate controlled building, with
one tailgate shipping dock.
CNC Milling Equipement:
1- 2012 DMG/ Mori Seiki DuraVerticle 1035 eco VMC 15 HP, 12,000 RPM Cat 40,
MAPPS IV Control, 40x22x20 travels with Renishaw OMP 40-2 Spindle Probe
for on machine inspection
1- 2004 Bridgeport 760 XP3 VMC 25 H.P., 12,000 RPM Big Plus Cat 40 spindle
with 300 psi coolant thru, and Fanuc 18i-MB control. 30x24x24 travels
1- 2006 Hurco VM-1 VMC 15 H.P., 8000 RPM Cat 40 spindle with Hurco Max
Control, 26x14x18 travels.
2- Lagun FTV-2 Knee Mills with Prototrak M2 controls.
1- Alliant TMV Knee Mill with Prototrak A.G.E.2 control
1- Alliant TMV Knee Mill with Prototrak M2 control
1- Alliant TMV Knee Mill with Prototrak Edge control
1- HAAS 5C CNC 4th Axis Index Head
CNC Lathe:
1- Milltronics ML-15 with 60" bed, 15" swing, 2.18" through spindle,
Centurion 6 control and Dorian 8 station Smartdex Automatic Turret.
Manual Millers:
1- Bridgeport Series 1 Knee Mill
3- Alliant TMV Knee Mill
Manual Lathes:
1- Takasawa TSL-800 EngineLathe with 15" swing and 48" bed
1- Hardinge HLV-H Toolroom Lathe
1- Hardinge HC Chucker with Threading Attachment
EDM:
1- Hansvedt SM-150B Sinker Type EDM Machine 20"x 12" table with
12" Ram travel
Molding:
1- Trubor 50 RS- 31/2 50 Ton Injection Molding Machine
Honing:
1- Sunnen MBB1650 Precision Honing Machine- 3" capacity
Saws:
1- Doringer D-350H Automatic Cold Saw with Dual Motors
1- Startrite H225 Horizontal Band Saw
1- Jet VBS-400 Verticle Band Saw
1- 10" Everett Abrasive Cut- Off Saw
Grinding:
1- Do All D824-10 Automatic Wet Grinder- 8"x 24"
1- Boyer Schultz H612 Surface Grinder - 6"x 18"
1- Acme 6B-II 48" Stroke Sander
1- Baldor 510 Carbide Grinder
1- Dayton Industrial Grinder
2- Dayton 6" Buffers
1- Rockwell Sander/ Grinder
Heat Treating;
1- Huppert 9PF-IF Furnace 2000 degree max
Abrasive Finishing:
1- Econoline Direct Pressure Floor Type Sandblast Unit with 36"x 22" x 20"
work area
1- Sweco 18" Bowl Type Tumbler with AquaSafe WTS-55 AJ Aqueous
Treatment System
Inspection Equipment:
1- 24" Tesa-Hite Electronic Digital Height Gage
1- 12" Mitutoyo Height Master Cadillac Gage
1- 14" Kodak Optical Comparator with Surface Illumination and Turret
Magnification up to 31.25 X
1- Sunnen PG-800 Precision Gage .3700- 3.0000 Range .00005 Graduations
1- Rock of Ages Surface Plate 18"x 24"
1- Mitutoyo 36 pc Gage Block Set
3- Van Keuren Pin Gage Sets .011-.625
Large Assortment of Various Measuring Tools, Gages, Deltronic Pins
and Indicators
Facility:
Approximately 5500 sqare feet in a modern climate controlled building, with
one tailgate shipping dock.
CNC Milling Equipement:
1- 2012 DMG/ Mori Seiki DuraVerticle 1035 eco VMC 15 HP, 12,000 RPM Cat 40,
MAPPS IV Control, 40x22x20 travels with Renishaw OMP 40-2 Spindle Probe
for on machine inspection
1- 2004 Bridgeport 760 XP3 VMC 25 H.P., 12,000 RPM Big Plus Cat 40 spindle
with 300 psi coolant thru, and Fanuc 18i-MB control. 30x24x24 travels
1- 2006 Hurco VM-1 VMC 15 H.P., 8000 RPM Cat 40 spindle with Hurco Max
Control, 26x14x18 travels.
2- Lagun FTV-2 Knee Mills with Prototrak M2 controls.
1- Alliant TMV Knee Mill with Prototrak A.G.E.2 control
1- Alliant TMV Knee Mill with Prototrak M2 control
1- Alliant TMV Knee Mill with Prototrak Edge control
1- HAAS 5C CNC 4th Axis Index Head
CNC Lathe:
1- Milltronics ML-15 with 60" bed, 15" swing, 2.18" through spindle,
Centurion 6 control and Dorian 8 station Smartdex Automatic Turret.
Manual Millers:
1- Bridgeport Series 1 Knee Mill
3- Alliant TMV Knee Mill
Manual Lathes:
1- Takasawa TSL-800 EngineLathe with 15" swing and 48" bed
1- Hardinge HLV-H Toolroom Lathe
1- Hardinge HC Chucker with Threading Attachment
EDM:
1- Hansvedt SM-150B Sinker Type EDM Machine 20"x 12" table with
12" Ram travel
Molding:
1- Trubor 50 RS- 31/2 50 Ton Injection Molding Machine
Honing:
1- Sunnen MBB1650 Precision Honing Machine- 3" capacity
Saws:
1- Doringer D-350H Automatic Cold Saw with Dual Motors
1- Startrite H225 Horizontal Band Saw
1- Jet VBS-400 Verticle Band Saw
1- 10" Everett Abrasive Cut- Off Saw
Grinding:
1- Do All D824-10 Automatic Wet Grinder- 8"x 24"
1- Boyer Schultz H612 Surface Grinder - 6"x 18"
1- Acme 6B-II 48" Stroke Sander
1- Baldor 510 Carbide Grinder
1- Dayton Industrial Grinder
2- Dayton 6" Buffers
1- Rockwell Sander/ Grinder
Heat Treating;
1- Huppert 9PF-IF Furnace 2000 degree max
Abrasive Finishing:
1- Econoline Direct Pressure Floor Type Sandblast Unit with 36"x 22" x 20"
work area
1- Sweco 18" Bowl Type Tumbler with AquaSafe WTS-55 AJ Aqueous
Treatment System
Inspection Equipment:
1- 24" Tesa-Hite Electronic Digital Height Gage
1- 12" Mitutoyo Height Master Cadillac Gage
1- 14" Kodak Optical Comparator with Surface Illumination and Turret
Magnification up to 31.25 X
1- Sunnen PG-800 Precision Gage .3700- 3.0000 Range .00005 Graduations
1- Rock of Ages Surface Plate 18"x 24"
1- Mitutoyo 36 pc Gage Block Set
3- Van Keuren Pin Gage Sets .011-.625
Large Assortment of Various Measuring Tools, Gages, Deltronic Pins
and Indicators
Approximately 5500 sqare feet in a modern climate controlled building, with
one tailgate shipping dock.
CNC Milling Equipement:
1- 2012 DMG/ Mori Seiki DuraVerticle 1035 eco VMC 15 HP, 12,000 RPM Cat 40,
MAPPS IV Control, 40x22x20 travels with Renishaw OMP 40-2 Spindle Probe
for on machine inspection
1- 2004 Bridgeport 760 XP3 VMC 25 H.P., 12,000 RPM Big Plus Cat 40 spindle
with 300 psi coolant thru, and Fanuc 18i-MB control. 30x24x24 travels
1- 2006 Hurco VM-1 VMC 15 H.P., 8000 RPM Cat 40 spindle with Hurco Max
Control, 26x14x18 travels.
2- Lagun FTV-2 Knee Mills with Prototrak M2 controls.
1- Alliant TMV Knee Mill with Prototrak A.G.E.2 control
1- Alliant TMV Knee Mill with Prototrak M2 control
1- Alliant TMV Knee Mill with Prototrak Edge control
1- HAAS 5C CNC 4th Axis Index Head
CNC Lathe:
1- Milltronics ML-15 with 60" bed, 15" swing, 2.18" through spindle,
Centurion 6 control and Dorian 8 station Smartdex Automatic Turret.
Manual Millers:
1- Bridgeport Series 1 Knee Mill
3- Alliant TMV Knee Mill
Manual Lathes:
1- Takasawa TSL-800 EngineLathe with 15" swing and 48" bed
1- Hardinge HLV-H Toolroom Lathe
1- Hardinge HC Chucker with Threading Attachment
EDM:
1- Hansvedt SM-150B Sinker Type EDM Machine 20"x 12" table with
12" Ram travel
Molding:
1- Trubor 50 RS- 31/2 50 Ton Injection Molding Machine
Honing:
1- Sunnen MBB1650 Precision Honing Machine- 3" capacity
Saws:
1- Doringer D-350H Automatic Cold Saw with Dual Motors
1- Startrite H225 Horizontal Band Saw
1- Jet VBS-400 Verticle Band Saw
1- 10" Everett Abrasive Cut- Off Saw
Grinding:
1- Do All D824-10 Automatic Wet Grinder- 8"x 24"
1- Boyer Schultz H612 Surface Grinder - 6"x 18"
1- Acme 6B-II 48" Stroke Sander
1- Baldor 510 Carbide Grinder
1- Dayton Industrial Grinder
2- Dayton 6" Buffers
1- Rockwell Sander/ Grinder
Heat Treating;
1- Huppert 9PF-IF Furnace 2000 degree max
Abrasive Finishing:
1- Econoline Direct Pressure Floor Type Sandblast Unit with 36"x 22" x 20"
work area
1- Sweco 18" Bowl Type Tumbler with AquaSafe WTS-55 AJ Aqueous
Treatment System
Inspection Equipment:
1- 24" Tesa-Hite Electronic Digital Height Gage
1- 12" Mitutoyo Height Master Cadillac Gage
1- 14" Kodak Optical Comparator with Surface Illumination and Turret
Magnification up to 31.25 X
1- Sunnen PG-800 Precision Gage .3700- 3.0000 Range .00005 Graduations
1- Rock of Ages Surface Plate 18"x 24"
1- Mitutoyo 36 pc Gage Block Set
3- Van Keuren Pin Gage Sets .011-.625
Large Assortment of Various Measuring Tools, Gages, Deltronic Pins
and Indicators
Facilities List
| 17 Everberg Rd. Woburn, MA 01801 (781)-932-8686 |
| Friday Engineering, Inc. |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
